Circular Saw Machine

Product Details:

Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.

Product Details:

• Suitable for processing of a large number of materials and shapes; solid material, tubes, square, rectangle material and profiles.
• Torsion free construction, heavy duty fabricated structure of machine.
• Infinitely variable controlled cutting feed through ball screw servo motor arrangement.
• VFD (Inventor) for various cutting speed.
• Precise indexing of job thrrough ball screw servo motor arrangement with +/-0.050mm accuracy.
• Cut of length measured by PLC using servo drive arrangement.
• Multiple shuttle index stroke for cutting length upto 3000mm.
• PLC control system with touch screen HMI  allows easy operation without need for machining or programming knowledge.
• HMI with self diagnostic feature for easy troubleshooting, warning, alerts etc.
• Auto and manual mode for cycle sequence.
• Hydraulic operated job clamping horizontal and vertical vice.
• Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.
• Inbuilt micro mist cooling arrangement.
• Separate hydraulic power pack with all control valves, guages and oil level indicator for easy check and maintenance.
• Electrical control panel with high quality switchgears.
• Robust inclined guide of saw head ensures a perfect rake angle and guarantees high cutting accuracy with maximum performance.
• Driver brushes for cleaning of chips from circular blades.
• To reduce saw blade vibration, machine is equipped with special saw blade plate guides that move blade near to teeth on both sides. This enables maximum cutting precision and best saw blade life at low unit cost.
• Automatic trim cut.
• Crop cut and end cut separator.
• Powered chip conveyor.
• PLC controlled auto lubrication unit for periodic lubrication of all sides.

Product Details:

• Suitable for processing of a large number of materials and shapes; solid material, tubes, square, rectangle material and profiles.
• Torsion free construction, heavy duty fabricated structure of machine.
• Infinitely variable controlled cutting feed through ball screw servo motor arrangement.
• VFD (Inventor) for various cutting speed.
• Precise indexing of job thrrough ball screw servo motor arrangement with +/-0.050mm accuracy.
• Cut of length measured by PLC using servo drive arrangement.
• Multiple shuttle index stroke for cutting length upto 3000mm.
• PLC control system with touch screen HMI  allows easy operation without need for machining or programming knowledge.
• HMI with self diagnostic feature for easy troubleshooting, warning, alerts etc.
• Auto and manual mode for cycle sequence.
• Hydraulic operated job clamping horizontal and vertical vice.
• Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.
• Inbuilt micro mist cooling arrangement.
• Separate hydraulic power pack with all control valves, guages and oil level indicator for easy check and maintenance.
• Electrical control panel with high quality switchgears.
• Robust inclined guide of saw head ensures a perfect rake angle and guarantees high cutting accuracy with maximum performance.
• Driver brushes for cleaning of chips from circular blades.
• To reduce saw blade vibration, machine is equipped with special saw blade plate guides that move blade near to teeth on both sides. This enables maximum cutting precision and best saw blade life at low unit cost.
• Automatic trim cut.
• Crop cut and end cut separator.
• Powered chip conveyor.
• PLC controlled auto lubrication unit for periodic lubrication of all sides.

Additional Information:

• Delivery Time: 2 - 4 week

Product Details:

• Suitable for processing of a large number of materials and shapes; solid material, tubes, square, rectangle material and profiles.
• Torsion free construction, heavy duty fabricated structure of machine.
• Infinitely variable controlled cutting feed through ball screw servo motor arrangement.
• VFD (Inventor) for various cutting speed.
• Precise indexing of job thrrough ball screw servo motor arrangement with +/-0.050mm accuracy.
• Cut of length measured by PLC using servo drive arrangement.
• Multiple shuttle index stroke for cutting length upto 3000mm.
• PLC control system with touch screen HMI  allows easy operation without need for machining or programming knowledge.
• HMI with self diagnostic feature for easy troubleshooting, warning, alerts etc.
• Auto and manual mode for cycle sequence.
• Hydraulic operated job clamping horizontal and vertical vice.
• Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.
• Inbuilt micro mist cooling arrangement.
• Separate hydraulic power pack with all control valves, guages and oil level indicator for easy check and maintenance.
• Electrical control panel with high quality switchgears.
• Robust inclined guide of saw head ensures a perfect rake angle and guarantees high cutting accuracy with maximum performance.
• Driver brushes for cleaning of chips from circular blades.
• To reduce saw blade vibration, machine is equipped with special saw blade plate guides that move blade near to teeth on both sides. This enables maximum cutting precision and best saw blade life at low unit cost.
• Automatic trim cut.
• Crop cut and end cut separator.
• Powered chip conveyor.
• PLC controlled auto lubrication unit for periodic lubrication of all sides.

Product Details:

• Suitable for processing of a large number of materials and shapes; solid material, tubes, square, rectangle material and profiles.
• Torsion free construction, heavy duty fabricated structure of machine.
• Infinitely variable controlled cutting feed through ball screw servo motor arrangement.
• VFD (Inventor) for various cutting speed.
• Precise indexing of job thrrough ball screw servo motor arrangement with +/-0.050mm accuracy.
• Cut of length measured by PLC using servo drive arrangement.
• Multiple shuttle index stroke for cutting length upto 3000mm.
• PLC control system with touch screen HMI  allows easy operation without need for machining or programming knowledge.
• HMI with self diagnostic feature for easy troubleshooting, warning, alerts etc.
• Auto and manual mode for cycle sequence.
• Hydraulic operated job clamping horizontal and vertical vice.
• Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.
• Inbuilt micro mist cooling arrangement.
• Separate hydraulic power pack with all control valves, guages and oil level indicator for easy check and maintenance.
• Electrical control panel with high quality switchgears.
• Robust inclined guide of saw head ensures a perfect rake angle and guarantees high cutting accuracy with maximum performance.
• Driver brushes for cleaning of chips from circular blades.
• To reduce saw blade vibration, machine is equipped with special saw blade plate guides that move blade near to teeth on both sides. This enables maximum cutting precision and best saw blade life at low unit cost.
• Automatic trim cut.
• Crop cut and end cut separator.
• Powered chip conveyor.
• PLC controlled auto lubrication unit for periodic lubrication of all sides.

Additional Information:

• Production Capacity: 8000-10000 pcs / shift
• Delivery Time: 4-6 Weeks
• Packaging Details: Standard

Product Details:

• Suitable for processing of a large number of materials and shapes; solid material, tubes, square, rectangle material and profiles.
• Torsion free construction, heavy duty fabricated structure of machine.
• Infinitely variable controlled cutting feed through ball screw servo motor arrangement.
• VFD (Inventor) for various cutting speed.
• Precise indexing of job thrrough ball screw servo motor arrangement with +/-0.050mm accuracy.
• Cut of length measured by PLC using servo drive arrangement.
• Multiple shuttle index stroke for cutting length upto 3000mm.
• PLC control system with touch screen HMI  allows easy operation without need for machining or programming knowledge.
• HMI with self diagnostic feature for easy troubleshooting, warning, alerts etc.
• Auto and manual mode for cycle sequence.
• Hydraulic operated job clamping horizontal and vertical vice.
• Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.
• Inbuilt micro mist cooling arrangement.
• Separate hydraulic power pack with all control valves, guages and oil level indicator for easy check and maintenance.
• Electrical control panel with high quality switchgears.
• Robust inclined guide of saw head ensures a perfect rake angle and guarantees high cutting accuracy with maximum performance.
• Driver brushes for cleaning of chips from circular blades.
• To reduce saw blade vibration, machine is equipped with special saw blade plate guides that move blade near to teeth on both sides. This enables maximum cutting precision and best saw blade life at low unit cost.
• Automatic trim cut.
• Crop cut and end cut separator.
• Powered chip conveyor.
• PLC controlled auto lubrication unit for periodic lubrication of all sides.

Product Details:

It is structured utilizing Servo and PLC controlled automation system. Made utilizing preeminent level crude materials; the solidly constructed System cuts more parts every hour and more parts per blade that a standard production saw. Both the X & Z axis are operated via servo drive, motor and precision ball screw. It turns at a higher RPM with a greater chip load than any other sawing system. Our machine gives precision and in-depth sawing solution thus increasing productivity and reducing the manpower. This Fully Automatic Circular Saw Machine is exceptionally demanded for its enormous performance, easy installation, maintenance & hassle-free operations and longer service life. It can replace 4 to 5 manufacturing band saws with a single circular saw machine.

Features:

• Cuts 50 Sec. Operations Down to 10 Sec.
• Eliminates Secondary Operations
• Surface Finish from 40 - 80 RMS
• Reliable 24/7 Operation
• 45° Slant Bed Approach of Saw HeadRigid Construction and Long Service Life
• Saw Head Travels on Hardened and Ground Linear Rails
• Linear Rails Automatically Lubricated for Long Service Life
• Saw Blade Housing Mounted to Massive Saw Head
• Saw Blade Guided into the Workpiece by Carbide Guides
• Guides Provide 4 Point Contact, Eliminating Blade Wobble or Deflection

Product Details:

Suitable for processing of a large number of materials and shapes; solid material, tubes, square, rectangle material and profiles.

Torsion free construction, heavy duty fabricated structure of machine.

Infinitely variable controlled cutting feed through ball screw servo motor arrangement.

VFD (Inventor) for various cutting speed.

Precise indexing of job thrrough ball screw servo motor arrangement with +/-0.050mm accuracy.

Cut of length measured by PLC using servo drive arrangement.

Multiple shuttle index stroke for cutting length upto 3000mm.

PLC control system with touch screen HMI  allows easy operation without need for machining or programming knowledge.

HMI with self diagnostic feature for easy troubleshooting, warning, alerts etc.

Auto and manual mode for cycle sequence.

Hydraulic operated job clamping horizontal and vertical vice.

Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.

Inbuilt micro mist cooling arrangement.

Separate hydraulic power pack with all control valves, guages and oil level indicator for easy check and maintenance.

Electrical control panel with high quality switchgears.

Robust inclined guide of saw head ensures a perfect rake angle and guarantees high cutting accuracy with maximum performance.

Driver brushes for cleaning of chips from circular blades.

To reduce saw blade vibration, machine is equipped with special saw blade plate guides that move blade near to teeth on both sides. This enables maximum cutting precision and best saw blade life at low unit cost.

Automatic trim cut.

Crop cut and end cut separator.

Powered chip conveyor.

PLC controlled auto lubrication unit for periodic lubrication of all sides.

Additional Information:

• Production Capacity: Per Hr 100 Pic of 125 Dia
• Delivery Time: 3-4 Week

Product Details:

 We are the leading manufacturer of a wide range of Circular Saw Machine and Band Saw Machine. These products are widely valued and appreciated in the market for their attributes such as robustness, consistency, and efficiency.

Product Details:

• Suitable for processing of a large number of materials and shapes; solid material, tubes, square, rectangle material and profiles.
• Torsion free construction, heavy duty fabricated structure of machine.
• Infinitely variable controlled cutting feed through ball screw servo motor arrangement.
• VFD (Inventor) for various cutting speed.
• Precise indexing of job thrrough ball screw servo motor arrangement with +/-0.050mm accuracy.
• Cut of length measured by PLC using servo drive arrangement.
• Multiple shuttle index stroke for cutting length upto 3000mm.
• PLC control system with touch screen HMI  allows easy operation without need for machining or programming knowledge.
• HMI with self diagnostic feature for easy troubleshooting, warning, alerts etc.
• Auto and manual mode for cycle sequence.
• Hydraulic operated job clamping horizontal and vertical vice.
• Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.
• Inbuilt micro mist cooling arrangement.
• Separate hydraulic power pack with all control valves, guages and oil level indicator for easy check and maintenance.
• Electrical control panel with high quality switchgears.
• Robust inclined guide of saw head ensures a perfect rake angle and guarantees high cutting accuracy with maximum performance.
• Driver brushes for cleaning of chips from circular blades.
• To reduce saw blade vibration, machine is equipped with special saw blade plate guides that move blade near to teeth on both sides. This enables maximum cutting precision and best saw blade life at low unit cost.
• Automatic trim cut.
• Crop cut and end cut separator.
• Powered chip conveyor.
• PLC controlled auto lubrication unit for periodic lubrication of all sides.

Product Details:

Additional Information:

• Production Capacity: 2000 pcs / day
• Delivery Time: 2-4 Weeks

Product Details:

Suitable for processing of a large number of materials and shapes; solid material, tubes, square, rectangle material and profiles.

Torsion free construction, heavy duty fabricated structure of machine.

Infinitely variable controlled cutting feed through ball screw servo motor arrangement.

VFD (Inventor) for various cutting speed.

Precise indexing of job thrrough ball screw servo motor arrangement with +/-0.050mm accuracy.

Cut of length measured by PLC using servo drive arrangement.

Multiple shuttle index stroke for cutting length upto 3000mm.

PLC control system with touch screen HMI  allows easy operation without need for machining or programming knowledge.

HMI with self diagnostic feature for easy troubleshooting, warning, alerts etc.

Auto and manual mode for cycle sequence.

Hydraulic operated job clamping horizontal and vertical vice.

Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.

Inbuilt micro mist cooling arrangement.

Separate hydraulic power pack with all control valves, guages and oil level indicator for easy check and maintenance.

Electrical control panel with high quality switchgears.

Robust inclined guide of saw head ensures a perfect rake angle and guarantees high cutting accuracy with maximum performance.

Driver brushes for cleaning of chips from circular blades.

To reduce saw blade vibration, machine is equipped with special saw blade plate guides that move blade near to teeth on both sides. This enables maximum cutting precision and best saw blade life at low unit cost.

Automatic trim cut.

Crop cut and end cut separator.

Powered chip conveyor.

PLC controlled auto lubrication unit for periodic lubrication of all sides.

Product Details:

• Suitable for processing of a large number of materials and shapes; solid material, tubes, square, rectangle material and profiles.
• Torsion free construction, heavy duty fabricated structure of machine.
• Infinitely variable controlled cutting feed through ball screw servo motor arrangement.
• VFD (Inventor) for various cutting speed.
• Precise indexing of job thrrough ball screw servo motor arrangement with +/-0.050mm accuracy.
• Cut of length measured by PLC using servo drive arrangement.
• Multiple shuttle index stroke for cutting length upto 3000mm.
• PLC control system with touch screen HMI  allows easy operation without need for machining or programming knowledge.
• HMI with self diagnostic feature for easy troubleshooting, warning, alerts etc.
• Auto and manual mode for cycle sequence.
• Hydraulic operated job clamping horizontal and vertical vice.
• Heavy duty reduction gearbox for heavy cutting torque mounted on linear motion guide ways for vibration free cutting to optimize cutter life and production.
• Inbuilt micro mist cooling arrangement.
• Separate hydraulic power pack with all control valves, guages and oil level indicator for easy check and maintenance.
• Electrical control panel with high quality switchgears.
• Robust inclined guide of saw head ensures a perfect rake angle and guarantees high cutting accuracy with maximum performance.
• Driver brushes for cleaning of chips from circular blades.
• To reduce saw blade vibration, machine is equipped with special saw blade plate guides that move blade near to teeth on both sides. This enables maximum cutting precision and best saw blade life at low unit cost.
• Automatic trim cut.
• Crop cut and end cut separator.
• Powered chip conveyor.
• PLC controlled auto lubrication unit for periodic lubrication of all sides.

Product Details:

It is structured utilizing Servo and PLC controlled automation system. Made utilizing preeminent level crude materials; the solidly constructed System cuts more parts every hour and more parts per blade that a standard production saw. Both the X & Z axis are operated via servo drive, motor and precision ball screw. It turns at a higher RPM with a greater chip load than any other sawing system. Our machine gives precision and in-depth sawing solution thus increasing productivity and reducing the manpower. This Fully Automatic Circular Saw Machine is exceptionally demanded for its enormous performance, easy installation, maintenance & hassle-free operations and longer service life. It can replace 4 to 5 manufacturing band saws with a single circular saw machine.

Features:

• Cuts 50 Sec. Operations Down to 10 Sec.
• Eliminates Secondary Operations
• Surface Finish from 40 - 80 RMS
• Reliable 24/7 Operation
• 45° Slant Bed Approach of Saw HeadRigid Construction and Long Service Life
• Saw Head Travels on Hardened and Ground Linear Rails
• Linear Rails Automatically Lubricated for Long Service Life
• Saw Blade Housing Mounted to Massive Saw Head
• Saw Blade Guided into the Workpiece by Carbide Guides
• Guides Provide 4 Point Contact, Eliminating Blade Wobble or Deflection

Product Details:

Features:

• Infinitely variable controlled cutting feed by hydraulic control valve.
• Hydraulic operated blade tensioning arrangement.
• Hydraulic operated job clamping main vice and shuttle vice.
• Hydraulic shuttle table arrangement for automatic indexing.
• Automachine machine stop when blade breaks.
• Inbuilt coolant tank with 3 way cooling arrangement.

Product Details: